Operation Manual

VII
124
CHILD SAFETY
* The ISOFIX shell is secured to the bottom rings on an ISOFIX position, occupying 2 rear seat positions.
** To install ISOFIX child seats type B1 , remove the head restraints from the seats.
L
OCATIONS FOR INSTALLING ISOFIX CHILD SEATS
In compliance with European legislation (ECE 16), this table indicates which of the ISOFIX child seats can be installed in
seat positions in your vehicle that are equipped with ISOFIX mounting points.
For ISOFIX universal and semi-universal child seats, the ISOFIX size class, defi ned by a letter from A to G , is shown on
the child seat to the right of the ISOFIX logo.
IUF : seat position suitable for installation of an I SOFIX U niversal " F orwards-facing" seat attached using the top belt.
IL-SU : seat position suitable for installation of an I SOFIX S emi- U niversal seat: ISOFIX "rearwards-facing" child seats
equipped with a top belt and ISOFIX "shell" child seats with a top belt.
Do not install ISOFIX child seats equipped with a bar.
Child weight/age given as a guide
Less than 10 kg
(group 0)
Up to approx.
6 months
Less than 10 kg
(group 0)
Less than 13 kg
(group 0+)
Up to approx.
1 year old
9 to 18 kg (group 1)
From 1 to 3 years approx.
Type of ISOFIX child seat Shell seat *
"Rearwards-
facing"
"Rearwards-
facing"
"Forwards-facing"
ISOFIX size classes F G C D E C D
A B B1 **
ISOFIX outer rear seats IL-SU IL-SU IL-SU IUF
ISOFIX centre rear seat X IL-SU IL-SU IUF