Operation Manual

X
175
CHECKS
BLEEDING THE DIESEL FUEL
FILTER
Protective cover
Removal
) Remove the protective cover by
unclipping fi rst point 1 , then 3
and 4 .
) Unclip point 2 pulling towards
you, then lift.
Refi tting
) Clip point 2 fi rst.
) Lower the cover, centring it.
) Clip points 1 and 4 , pushing ver-
tically and slightly rearwards.
) Clip point 3 , pushing vertically.
Bleeding water from the fuel
filter
Bleed the fi lter regularly (at every oil
change).
To evacuate the water, slacken the
bleed screw or the water-in-Diesel
sensor, which is located at the base
of the fi lter.
Persist until water ceases to fl ow
out.
Then retighten the bleed screw or
the water-in-Diesel sensor.