Operation Manual

XI
185
PRACTICAL INFORMATION
) Connect the compressor's elec-
tric plug to the vehicle's 12 V
socket again.
) Start the vehicle again and leave
the engine running.
) Adjust the pressure using the
compressor (to infl ate: switch A
in position "1" ; to defl ate:
switch A in position "0" and
press button B ), in accordance
with the vehicle's tyre pressure
label (located on the door aper-
ture on the driver's side), then re-
member to check that the leak is
plugged correctly (no further loss
of pressure after several miles).
) Remove the compressor, then
store the whole kit.
) Drive at reduced speed (50 mph
[80 km/h]).
) Visit a CITROËN dealer or a
qualifi ed workshop as soon as
possible to have the tyre repaired
or replaced by a technician.
Take care, the sealant
cartridge contains ethyl-
ene-glycol. This product is
harmful if swallowed and causes
irritation to the eyes. Keep it out of
reach of children.
The expiry date of the sealant is
indicated on the base of the car-
tridge.
The cartridge is designed for a sin-
gle use; even if only partly used, it
must be replaced.
After use, do not discard the car-
tridge into the environment, take it
to a CITROËN dealer or to an au-
thorised waste disposal site.
Do not forget to obtain a new
sealant cartridge, available from
a CITROËN dealer or a qualifi ed
workshop.
Under-inflation detection
If the vehicle is fi tted with tyre under-
infl ation detection, the tyre under-
infl ation warning lamp will remain on
after the wheel has been repaired
until the system is reinitialised by
a CITROËN dealer or a qualifi ed
workshop.