Operation Manual

XI
190
PRACTICAL INFORMATION
CHANGING A BULB
The headlamps are fi tted
with polycarbonate glass
with a protective coating:
) do not clean them using a dry
or abrasive cloth, nor with a
detergent or solvent product,
) use a sponge and soapy water,
) when using a high pressure
washer on persistent marks,
do not keep the lance directed
towards the lamps or their
edges for too long, so as not to
damage their protective coating
and seals.
) Do not touch the bulb directly
with your fi ngers, use lint-free
cloths.
Changing a bulb should only be
done after the headlamp has been
switched off for a few minutes (risk
of serious burns).
It is imperative to use only anti-ul-
traviolet (UV) type bulbs in order
not to damage the headlamp.
Always replace a failed bulb with a
new bulb with the same type and
specifi cation.
Front lamps
1. Dipped beam headlamps
(H7-55 W)
2. Main beam headlamps
(H1-55 W)
3. Sidelamps (H6W-6 W )
Daytime running lamps/
sidelamps (LEDs)
4. Direction indicators
(H21-21 W)
Model with halogen headlamps Model with Xenon headlamps
and directional headlamps
1. Dual-function Xenon
headlamps (dipped/main
beam)
2. Additional main beams
(H7-55W)
3. Sidelamps (H6W-6W)
Daytime running lamps/
sidelamps (LEDs )
4. Direction indicators (H21-21W)