Operation Manual

XI
191
PRACTICAL INFORMATION
Main beam headlamps
) Remove the rubber cover.
) Detach the clips by lowering
them on each side of the bulb.
) Pull on the bulb-holder to remove it.
) Replace the faulty bulb.
) Push the bulb-holder back into
its housing.
) Reattach the clips.
) Refi t the rubber cover.
Dual-function Xenon headlamps
(dipped/main beam)
Additional main beam headlamps
) Remove the rubber cover.
) Rotate the bulb-holder a quarter
turn anti-clockwise and remove it
from its housing.
) Replace the faulty bulb.
) Reposition the bulb-holder by
pushing it in, tightening it by a
quarter turn clockwise.
) Refi t the rubber cover.
If the headlamp bears this
symbol, any operation to
change the Xenon dual-
function directional head-
lamp (D1S-35 W) must be carried
out by professionals (risk of elec-
trocution).
Contact a CITROËN dealer or a
qualifi ed workshop.
It is recommended to change both
bulbs at the same time if one of
them is faulty.
Dipped beam headlamps
) Remove the rubber cover.
) Rotate the bulb-holder a quarter
turn anti-clockwise and remove it
from its housing.
) Replace the faulty bulb.
) Reposition the bulb-holder by
pushing it in, tightening it by a
quarter turn clockwise.
) Refi t the rubber cover.