Operation Manual

XI
197
PRACTICAL INFORMATION
CHANGING A FUSE
Access to tools
The extraction tweezer A is located
on the back of the dashboard fuse-
box cover.
For access to it:
) open the glove box lid,
) unclip the fusebox cover by pull-
ing the top right, then left,
) pull the cover down,
) remove the tweezer.
Changing a fuse
) Use the special tweezer A to re-
move the fuse from its housing
and check the condition of the
fi lament.
) Replace the failed fuse with a
fuse of the same rating (same
colour) .
A different rating may cause a
malfunction (risk of fi re).
If the fault occurs again soon after
replacing the fuse, have the electri-
cal system checked by a CITROËN
dealer or a qualifi ed workshop.
God Failed
Tweezer A
Fuses in the dashboard
Your vehicle’s electrical
system is designed to oper-
ate with either standard or
optional equipment.
Before installing electrical equip-
ment or accessories on your vehi-
cle, consult a CITROËN dealer or a
qualifi ed workshop.
CITROËN declines all responsibil-
ity for the consequences and costs
that are caused by faults or repairs
on your vehicle resulting from the in-
stallation of accessories that are not
supplied and/or not recommended by
CITROËN and not installed according
to its instructions, particularly when
the energy consumption of all of the
additional accessories connected ex-
ceeds 10 milliamperes (Ma).
Before replacing a fuse:
- the cause of the failure must be
identifi ed and rectifi ed,
- all electrical consumers must be
switched off,
- your vehicle must be stationary
with the engine off.
Identify the failed fuse by reference
to the tables and layout drawings
below.