Operation Manual

27
FAMILIARISATION
DRIVIN
G
Stop & Start
Engine going into STOP mode
The "ECO" warning lamp comes
on in the instrument panel and
the engine goes into stand-by:
- with the 6-speed electronic gear-
box system ; at speeds below
4 mph (6 km/h), press the brake
pedal or put the selector lever into
neutral (position N) .
In certain circumstances the STOP
mode may not be available; the "ECO"
warning lamp fl ashes for a few sec-
onds, then goes off.
 153
The "ECO" warning lamp goes
off and the engine restarts:
- with the selector lever in position A
or M , release the brake pedal,
- or with the selector lever in posi-
tion N and the brake pedal released,
change to position A or M ,
- or select reverse gear.
In certain circumstances, START mode
may be invoked automatically; the
"ECO" warning lamp fl ashes for a few
seconds, then goes off.
 154
Deactivation/Reactivation
You can deactivate the system at any
time by pressing the "ECO OFF" but-
ton; the button’s warning lamp comes
on.
The system is reactivated automati-
cally every time you start the engine
with the key.
Before refuelling or doing any-
thing under the bonnet, you
must switch off the ignition
with the key.
 154
Going into engine START mode