Operation Manual

XI
183
PRACTICAL INFORMATION
Dipped beam
headlamps
) Remove the protective cap B .
) Disconnect the connector by
pressing it between the thumb
and index fi nger.
) Free the bulb from its two metal
clamps.
) Take out the bulb.
) Replace the bulb, exerting a slight
axial force.
) Refi t the connector, until it is all
the way in.
) Refi t the protective cap B .
Directional lamp
) Remove the protective cap C .
) Disconnect the connector by
pressing it between the thumb
and index fi nger.
) Free the bulb from its two metal
clamps.
) Take out the bulb.
) Replace the bulb, exerting a
slight axial force.
) Refi t the connector, until it is all
the way in.
) Refi t the protective cap C .