Operation Manual

XI
186
PRACTICAL INFORMATION
Wing-mounted lamps
) Remove the lateral boot trim
fl ap A . To do so, pull it towards
the inside of the boot, then pull it
upwards.
) Disconnect connector B .
) Unscrew the 2 fi xings C .
)
Remove the lamp from its housing.
) Detach the bulb holder D .
) Replace the bulb.
) Refi t the bulb holder D .
) Place the lamp in its housing.
) Screw in the 2 fi xings C .
) Refi t connector B .
) Refi t the trim A .
You can use the wheelbrace to
screw or unscrew the fi xings C .