Specifications

104
III
3
2
6
7
2
3
A 7
Delayed start-up
Note : Before programming the
delayed start-up of the heating,
you must ensure that the clock is
set to the correct time.
P R O G R A M M A B L E H E AT I N G
Programming the start-up time
Start-up may be programmed
between 1 minute and 24 hours in
advance.
You can store up to 3 different start-
up times, but programme only 1
delayed start-up time.
Factory settings A :
Time
1 : 06:00.
Time
2 : 16:00.
Time
3 : 22:00.
Note :
The factory settings are
replaced once you adjust them.
The programmed times are stored
until they are re-programmed.
•
•
•
Press button 3 then buttons 2 or 7
in the next 10 seconds, until the
desired start-up time is displayed.
Note :
In the event of a battery
failure, the factory settings are
restored.
Note :
if you wish to recall the other
stored times, press several times on
button 3 in the next 10 seconds until
the desired programme number is
displayed.
Cancelling the programmed time
To cancel the programmed start-up
time, press briey on button 3.
Setting the time
Hold button 3 down and press but-
ton 2 or button 7. Release button 3,
the time is displayed and symbol 6
ashes.
Use the two adjustment buttons 2
(to go forward) or 7 (to go back)
until the correct time is displayed.
Holding these buttons down will
make the numbers displayed scroll
more quickly.
Reading the time
Press button 2 or button 7 to dis-
play the time.
When the heating mode is acti-
vated, the remaining operating time
is displayed in place of the time.