Specifications

138
IV
B L U E TO O T H
®
Note: Refer to the user instruc-
tions to familiarise yourself with the
features of twinning.
The telephone detects the
Bluetooth
®
system on your
vehicle. “CITROËN” displays
on your telephone.
You should then select “CITROËN”
on your telephone controls. Next
you have to accept or decline this
twinning.
Note: If the 4 twinning memories
are already being used, you must
select a memory that is already
attributed although the telephone
twinned to this location will no
longer be.
Next the telephone asks you
to enter an identication code:
1234.
Validate.
Note: This entry may be demanded
earlier in the twinning sequence.
The telephone is now twinned to
your Bluetooth
®
system. For imme-
diate access to the Bluetooth
®
functions, it may be necessary to
make a connection (see following
page Conguration : Connecting
a twinned mobile telephone).
Once the twinning is nished, you
will be able to connect your tele-
phone via the “Main menu”.
•
•
•
Connecting a twinned
telephone
Each time you enter the vehicle,
after switching on the audio system,
your telephone is detected automati-
cally. If more than one telephone is
present, the last telephone to have
been connected is the rst to be rec-
ognised.
Note:
Disconnections may occur.
You may have to make a new con-
nection (see following page, Con-
guration : Connecting a twinned
mobile telephone).
Remarks:
In the event of a problem, it is
recommended to switch your tel-
ephone off and then on again.
If you switch off your telephone
within the eld of reception of the
Bluetooth
®
system on your vehi-
cle, the next connection will not
be automatic. To restore auto-
matic connection, you will have
to connect your telephone manu-
ally (see following page, Cong-
uration : Connecting a twinned
mobile telephone).
If you are already in telephone
communication when the audio
system is turned on, the latter
detects the telephone.
To avoid interference, you are
advised not to place your mobile
telephone close to your radio.
To accept an incoming call
Using button L or control 2 at the
steering wheel.
•
•
•
•
Your audio system may be
Bluetooth
®
compatible. It allows
you to connect a mobile tele-
phone for use “hands free” and
even to use its directory.
It permits you to twin up to four tel-
ephones, to be able then to con-
nect whichever one you choose.
The Bluetooth
®
functions available
and the content of the display are
dependent on the type of mobile
telephone, its settings and the type
of contract you have. For this rea-
son it is advisable to make enquir-
ies with your telephone provider.
Prior to any operation:
Your display should be lit up
(key in position
M).
Your telephone's Bluetooth
®
system must be activated.
Twinning a telephone
Twinning a telephone consists
of having it recognised by the
Bluetooth
®
system on your vehicle.
This then permits an instantaneous
connection.
Twinning can only be performed
with ignition switched on, display
illuminated, engine stopped. No
other telephone should be con-
nected.
The twinning must be performed
with the telephone and its
Bluetooth
®
system activated.
•
•
•