Specifications

151
V
1
2
4
3
D I E S E L I N J E C T I O N E Q U I P M E N T
Protective cover for HDi 138
engines:
Remove the protective cover by
rst unclipping at 3, then 1 and 4.
Unclip at 2 by pulling towards you,
then lift up.
To ret the protective cover, rstly
clip in at 2. Lower and centre the
cover. Clip in at 3 and 4, pushing
vertically and gently from the rear.
Clip in at 1 pushing vertically.
Protective cover for HDi 110,
HDi 173 and V6 HDi 208
engines:
Pull the protective cover upwards
to remove.
Draining water from the fuel
lter
Drain regularly (at each oil
change).
To drain the water, slacken the
bleed screw or the water in diesel
fuel sensor, located at the base of
the lter.
Continue until all the water has
owed out.
Then retighten the bleed screw or
the water detection sensor.
HDi engines are the result of advanced technology.
Any intervention requires special qualications which only a
CITROËN dealer can guarantee.