Specifications

164
VI
A
H
I
Front direction indicator
1 Remove the xing screw of
cover A using a torx tool, tip the
cover over and remove.
2
Remove the xing screw of
lamp B using a torx tool and pull
the headlamp unit to remove it
from the bumper.
3 Detach the bulb
C by pressing
on bars 1 and 2.
4 Disconnect the connector (pull
whilst pressing on the grey
tongue using a at screwdriver).
5
Replace the bulb.
6
Connect the connector (push the
grey tongue in well).
7
Replace the headlamp unit in the
bumper.
8 Screw the headlamp unit in.
9
Position the cover using its
guides and screw in.
Bulbs: HP24W
Dipped beam
1 Lift up the pegs F to remove the
cover on the headlamp.
2 Remove the protective cap
H.
3
Disconnect the connector by
pressing it between the thumb
and index nger.
4 Free the bulb from its two metal
clamps.
5
Take out the bulb.
6
Replace the bulb, exerting a
slight axial force.
7
Reconnect the connector, until
it is all the way in.
8 Replace the protective cap
H.
9
Replace the cover and x it in
place using the pegs F.
Bend lighting
1 Lift up the pegs F to remove the
cover on the headlamp.
2 Remove the protective cap
I.
3
Disconnect the connector by
pressing it between the thumb and
index nger.
4 Free the bulb from its two metal
clamps.
5
Take out the bulb.
6
Replace the bulb, exerting a
slight axial force.
7
Reconnect the connector, until
it is all the way in.
8 Replace the protective cap
I.
9
Replace the cover and x it in
place using the pegs F.
C H A N G I N G B U L B S
H E A D L A M P S