Specifications

173
VI
A
1
P U N C T U R E K I T
Puncture kit
The puncture repair kit is located in
the boot, underneath the tool kit.
The puncture repair kit is a com-
plete system including a compres-
sor and a setting product.
Using the puncture repair kit
1 Remove the sticker found in the
kit, then stick it on the steering
wheel to remind you that you
are driving with a wheel that is
only t for temporary use and
that your speed is therefore lim-
ited.
2 Connect the ask
1 to the valve
of the tyre to be repaired.
3
Connect the electric cable to
one of the vehicle's 12V sock-
ets.
4 With the engine running, start
the compressor by pressing on
button A until the tyre pressure
reaches 2,0 bars. If you cannot
reach a pressure of 2 bars, the
tyre is not repairable.
5
Remove and store the com-
pressor.
6
Drive off immediately, for a few
miles at reduced speed, to allow
the puncture repair to set.
7
Adjust the tyre pressure using
the compressor according to
the recommendations for the
vehicle, and check that there
is no air escaping (no loss of
pressure). If you cannot reach
a pressure of 2 bars, the tyre is
not repairable.
8
Do not exceed 110 km/h (68 mph).
The tyre must be examined,
then repaired or replaced as
soon as possible by a profes-
sional.
Warning, the ask of puncture repair gel contains ethylene-glycol, a product that is toxic if ingested
and irritating for the eyes.
Keep out of the reach of children.
After use, do not dispose of the ask in the natural environment, but return it to a CITROËN dealer
or to a recognised recovery facility.
This repair kit is available from a CITROËN dealer.