Specifications

45
II
A
3
2
4
1
LIGHTING CONTROL STALK
1 : Off.
2 : Automatic lighting.
3 : Sidelamps.
4 : Dipped beams / Main beams.
All vehicle lamps off
Rotate the ring A forwards.
They go out once the brightness
has reached a satisfactory level
or about 5 minutes after the wind-
screen wipers have stopped.
To activate this function, turn the
ring A to position 2.
Take care not to cover the bright-
ness sensor, which is visible
from outside the windscreen,
behind the interior rear view mir-
ror.
Automatic lighting of
headlamps
The sidelamps and the dipped
beams come on automatically
when the light is insufcient or if
the windscreen wipers are in con-
tinuous operation.
Rotate the ring
A forwards.
Sidelamps on
Dipped beams/
main beams on
Pull the control stalk towards you
to change between dipped beam
and main beam.
Rotate the ring
A forwards.
S I G N A L L I N G
Manual headlamp height
adjustment
You are advised to adjust the aim
of the headlamps in accordance
with vehicle load.
0. 1 or 2 people in the front seats.
-. 3 people.
1. 5 people.
-.
Intermediate setting.
2. 5 people + maximum permitted
load.
-.
Intermediate setting.
3.
Driver + maximum permitted
load.
Visible alert / headlamp
ash
Pull the control towards you.
The headlamp ash can be made
even with the ignition switched off.