Specifications

49
II
W I P E R S
FRONT WIPERS
Control positions
2: Rapid wipe.
1: Normal wipe.
I : Intermittent wipe.
0: Off.
One press downwards:
AUTO:
Automatic wipe acti-
vated.
Single wipe.
•
•
Position I : The speed of the wip-
ers will adjust itself to the speed of
your vehicle.
Positions 1 and 2: When the vehi-
cle is stationary, the speed of the
wipers will reduce automatically.
For safety, the wiper system is
deactivated when the ignition is
switched off.
Automatic wipe: To activate auto-
matic wipe, place the control stalk
on position 0, then press it down-
wards. The activation of this mode
is conrmed by one wipe and a
message on the instrument panel
screen. The wipe speed will adjust
according to the intensity of the
rain.
Note:
Pulling the stalk downwards will
produce a single wipe, without
deactivating automatic wiping.
Automatic wiping is not retained
once the engine is switched
off.
Deactivation of automatic
wipe:
Go to position I , then return to
position 0.
Or stop the engine.
•
•
•
•
Do not cover the rain detector which is located behind the interior
rear view mirror and visible from outside the windscreen.
Using an automatic car wash: switch the ignition off to avoid the wiping system activating.
Screen wash
Pull the screen wipe control stalk
towards you.
The screen wash is accompanied
by a timed wipe sequence. If the
dipped beams are on, it is also
accompanied by a timed headlamp
wash.