Specifications

50
II
A
W I P E R S
Check that the wipers can oper-
ate freely in freezing tempera-
tures.
Remove any accumulation of
snow at the base of the wind-
screen.
Changing the wiper blades
If changing the wiper blades, they
must be stopped in the mainte-
nance position. For this, switch
off the ignition and then within one
minute move the wiper control
stalk. The wipers stand up verti-
cally.
After replacement, switch on the
ignition and move the wiper
control stalk so that the wipers
resume their normal position.
Remark: The maintenance posi-
tion can also be used in snowy
conditions to avoid a build up of
snow.
REAR WIPERS AND WASH
(TOURER)
Rotate control A to the desired
position.
Off
Intermittent wipe
The screen wash is accompanied
by a timed rear wipe sequence.
Screen wash