Specifications

80
II
E L E C T R I C PA R K I N G B R A K E
O P E R AT I N G A N O M A L I E S
SITUATION CONSEQUENCES
1 Electronic parking brake fault and display
of message “Parking brake faultyand the
following warning lamps:
If the electronic parking brake fault warning lamp and the serv-
ice warning lamp light up, position the vehicle in a safe location
(on at ground, with a gear engaged).
2 Display of the messages “Parking brake
faultyand Anti-rollback system faulty”,
and the following warning lamps:
The automatic functions are deactivated.
The hill start assist is unavailable.
The electronic parking brake is only available manually.
3 Display of the messages “Parking brake
faultyand Anti-rollback system faulty”,
and the following warning lamps:
The manual release of the electronic parking brake is unavail-
able.
The hill start assist is unavailable.
The automatic functions and manual application are still avail-
able.
4 Display of the messages “Parking brake
faultyand Anti-rollback system faulty”,
and the following warning lamps:
The automatic functions are deactivated.
The hill start assist is unavailable.
To apply the electronic parking brake:
1. Immobilise the vehicle and switch off the ignition.
2. Pull the control lever for at least 5 seconds or until maximum
application.
3. Switch on the ignition and check that the electronic parking
brake warning lamps are on.
Note:
Application may take longer than in normal operation.
If warning lamp (!) ashes or if the warning lamps do not come
on when the ignition is switched on, this method does not work.
Contact a CITRN dealer.
To release the electronic parking brake:
1. Switch on the ignition.
2. Push the control lever and hold it for over 3 seconds.
and/or Flashing