Specifications

a b
a b
c
88III
CHILD RESTRAINTS
Pack Lounge seats Conventional benchseat
The ISOFIX fastening sys-
tem
The ISOFIX system features 3
rings for each lateral rear seat
position :
Two bottom rings a and b
located between the backrest
and the seat cushion. These
are about 28 cm apart, con-
cealed in the case of a bench-
seat under a flap with the logo
ISOFIX.
One top ring c fixed on the rear
shelf, concealed under a flap
with the logo TOP TETHER
behind the head restraint.
•
•
ISOFIX ANCHORING POINTS
AND THE ISOFIX FASTEN-
ING SYSTEM
Your vehicle is type-approved
according to new ISOFIX direc-
tives. The lateral rear seats of your
vehicle are each equipped with reg-
ulation ISOFIX anchoring points.
Incorrect installation of a child seat
in a vehicle compromises protec-
tion of the child in the event of a col-
lision. The ISOFIX system enables
you to minimise the risks posed by
incorrect fitting. The ISOFIX fasten-
ing system gives you a convenient,
strong and reliable fitting for a child
seat in your vehicle.
The ISOFIX child seat fasten-
ing system
ISOFIX child seats have two
latches which are easy to secure
on the two bottom rings a and b.
Some ISOFIX child seats also have
a top belt which is for attaching on
the ISOFIX top ring c.
To attach the top belt, raise the
head restraint of the vehicle seat,
then pass the buckle between the
two supports. Next fix the buckle
on the top ring c and tension the
top belt.
This fixing system is intended for
children weighing up to 18 kg.
The ISOFIX child seats rhat can be
installed in your vehicle are given
in the table opposite.
Anglais_indexe.indd Sec1:88Anglais_indexe.indd Sec1:88 06/10/2005 14:12:2206/10/2005 14:12:22