Handbook

11 11
11 11
PRACTICAL INFORMATION
120
CHANGING A WHEEL
Procedure for changing a faulty wheel
for the spare wheel using the tools pro-
vided with the vehicle.
Access to the tools
The tools are installed in the boot under
the fl oor.
To gain access to them:
 open the boot,
 raise the fl oor,
 remove the polystyrene storage box,
 unclip and remove the box containing
the tools.
Wheel with trim
When removing the wheel , fi rst detach the trim using the wheelbrace 1
pulling at the valve passage hole.
When refi tting the wheel , refi t the trim starting by placing its cut-out at the
valve and press around its edge with the palm of your hand.
List of tools
All of these tools are specifi c to your
vehicle. Do not use them for other
purposes.
1. Wheelbrace.
Permits removal of the wheel trim
and removal of the wheel fi xing
bolts.
2. Jack with integral handle.
Permits raising of the vehicle.
3. "Bolt cover" tool.
Permits removal of the bolt pro-
tectors (covers) on alloy wheels.
4. Socket for the security wheel
bolts (located in the glove box).
Permits adaptation of the wheel-
brace to the special "security"
wheel bolts.