Handbook

11 11
11 11
PRACTICAL INFORMATION
124
In some climatic conditions (e.g.
low temperature or humidity),
the presence of misting on the
internal surface of the glass of
the headlamps and rear lamps
is normal; it disappears after the
lamps have been on for a few
minutes.
The headlamps are fi tted with
polycarbonate glass with a pro-
tective coating:
 do not clean them using a
dry or abrasive cloth, nor
with a detergent or solvent
product,
 use a sponge and soapy water,
 when using a high pressure
washer on persistent marks,
do not direct at the lamps or
their outlines for too long, so
as not to damage their coat-
ing and their seals.
CHANGING A BULB
Procedure for replacing a faulty bulb
with a new bulb .
 Do not touch the bulb directly
with your fi ngers, use lint-
free cloths.
Changing a halogen bulb should
only be done after the headlamp
has been switched off for a few
minutes (risk of serious burns).
It is imperative to use only anti-
ultraviolet (UV) type bulbs in order
not to damage the headlamp.
Front lamps
1. Direction indicators
(PY21W amber).
2. Sidelamps (W5W).
3. Main beam headlamps (H1-55W).
4. Dipped beam headlamps
(H7-55W).
5. Front foglamps (PSX24W).