Operation Manual

131
Discharged battery
QUICK HELP
8
A. Positive metal point on your vehicle
B. Slave battery
C. Earth on your vehicle
Starting from another battery
- Connect the red cable to the metal
point A then to the positive (+) terminal
of the slave battery B .
- Connect one end of the green or black
cable to the negative (-) terminal of the
slave battery B .
- Connect the other end of the green
or black cable to the earth point C on
your vehicle.
- Operate the starter, let the engine run.
- Wait for the engine to return to idle, then
disconnect the cables.
Charging the battery using
a charger
- Go to the battery located in the front left
floor.
- Disconnect the battery.
- Follow the instructions for use given by
the battery charger manufacturer.
- Reconnect starting with the negative (-)
terminal.
- Check that the terminals and connectors
are clean. If they are covered with
sulphate (white or greenish deposit),
disconnect them and clean them.
BATTERY