Operation Manual

139
QUICK HELP
8
Failed bulb or lamp
1 - Main beam headlamps
Type D , H7 - 55 W
- Remove the cover by pulling on the
rubber tongue.
- Disconnect the electrical connector.
- Release the retaining spring by pressing
on the central clip.
- Change the bulb taking care to align the
metal part with the groove on the lamp.
2 - Dipped beam headlamps
Type D , H7 - 55 W
- Remove the cover by pulling on the
rubber tongue.
- Disconnect the electrical connector.
- Release the retaining spring by pressing
on the central clip.
- Change the bulb taking care to align the
metal part with the grooves on the lamp.
Front lamps
Open the bonnet.
To access the bulbs, reach behind the
headlamp unit. If necessary you can remove
the headlamp:
- Disconnect the electrical connector by
removing its locking ring.
- Remove the two headlamp fixing
screws.
- Move the headlamp towards the centre
of the vehicle to extract it from its
sliders.
On the left hand side, take care not to
dislodge the bonnet stay.
3 - Direction indicators
Type A , WY 21 W - 21 W
- Remove the cover by pulling on the
rubber tongue.
- Turn the bulb holder a quarter turn
anticlockwise.
- Change the bulb.