Operation Manual

142
Failed bulb or lamp
Rear lamps
For more information on the bulbs, refer to
the table "Types of bulb or lamp".
Carry out these operations in reverse order
to fit the new bulb.
1. Brake lamps
Type B, P21W - 21W
2. Brake/sidelamps
Type B, P 21/5W - 21W and 5W
3. Direction indicators
Type B, PY 21W - 21W
4. Reversing lamps
Type A, W16W - 16W
5. Foglamp
Type A, W16W - 16W
- Identify the failed bulb then open the
rear doors.
- Remove the corresponding access cover
by removing the seven fixing screws
(van)
o r
Remove the corresponding access cover
by pulling on its grip to unclip it (combi).
- Disconnect the electrical connector by
pressing on its central tongue.
- Remove the two fixing nuts of the lens.
- Pull the lens from the outside.
- Remove the six bulb holder fixing
screws.
- Spread the three retaining tongues and
remove the bulb holder from its housing.
- Change the bulb.