Operation Manual

06
10.22
Pairing a Bluetooth telephone
First connection
For reasons of safety and because they require prolonged attention
on the part of the driver, the operations for pairing a Bluetooth mobile
telephone to the hands-free system of the audio system must be
carried out with the
vehicle stationary
.
Select " Yes " to start the pairing procedure,
and search for the name of the system in the
telephone (otherwise selecting "No", the main
Telephone screen page is displayed).
When pairing, a screen page is displayed showing progress in the
operation.
Using the telephone's keypad, enter the PIN
displayed in the screen of the system or confi rm
in the telephone the PIN displayed.
Press "
Phone
".
If no telephone has yet been paired in the
system, a special page is displayed in the
screen.
Switch on the Bluetooth function of your
telephone and ensure that it is "visible to all"
(telephone confi guration).
BLUETOOTH
If the operation fails, we recommend switching
the Bluetooth function of your telephone off and
then on again.
When the pairing procedure has fi nished
successfully, a screen page appears:
Reply "Yes" to the question, the mobile phone
is saved as the favourite (this telephone will
have priority over other telephones paired
subsequently).
If no other device has been paired, the system
considers the fi rst device paired to be the
favourite.
For telephones not set as favourite, the order of priority is
determined in the order of connection. The last telephone connected
has the highest priority.