Operation Manual

30
Instruments and controls
Screen displays indicates Solution - action
Temperature /
Ice
the ice warning,
the temperature
flashing
accompanied by
a message on
the screen.
weather conditions which could
result in ice on the road.
Be particularly vigilant and do not brake sharply.
"Safety - Driving safely".
Date / Time
a setting: date,
time.
a configuration via the "MODE"
menu.
"Technology on board - Vehicle configuration" section.
Headlamp beam
height
a headlamp
height setting.
a position from 0 to 3
depending on the load carried
Adjust using the buttons on the MODE control panel.
"Ease of use and comfort - Steering mounted controls"
section.
Service spanner
a service
spanner which
remains on.
that a service will soon be due.
Refer to the list of checks in the maintenance and
warranty guide, then have the service carried out.
Stop & Start
on.
engine going into STOP mode
after the the vehicle stops.
As soon as you want to move off, the warning lamp
goes off and the engine restarts automatically in
START mode.
flashes for a few
seconds, then
goes off.
STOP mode temporarily
unavailable or automatic
operation of START mode.
Special cases for STOP mode and START mode.
"Ready to go - Starting and stopping" section.