Operation Manual

ManualsBrandsCitroen ManualsCarNemo 2008

99

7

TROUBLESHOOTING

Changing a wheel

CHANGING A WHEEL

PARKING THE VEHICLE

As far as possible, park the vehicle on level,

stable and non-slippery ground.

Apply the handbrake, switch off the ignition

and engage first gear (on a hill).

If possible, place a chock under the

wheel diagonally opposite the wheel to be

changed.

TOOLS

The tools required are stored in a tool kit

located behind the driver’s seat (Van) or

behind the rear benchseat (Combi)

.

1. Wheelbrace.

2. Centring guide.

3. Screwdriver.

4. Jack with handle.

5. Removable towing eye.

TAKING OUT THE SPARE WHEEL

The spare wheel retaining bolt is located on

the rear left part of the loading sill.

1. Slacken the wheel retaining bolt using the

wheelbrace.

2.

Unscrew fully to unwind the cable winch.

3. Take out the spare wheel using the

wheelbrace.

4. Raise the cover A .

5. Remove the cable B from its housing.

6. Release the spare wheel and place it

near the wheel to be changed.