Training manual

Chapter 3

MULTIPLEXED BSI - XSARA PICASSO AND XSARA – PART 4

VI - CLOCK / DATE / TEMPERATURE FUNCTION

A - GENERAL

When these parameters are lost (i.e. after disconnecting the battery), the time

displayed starts at "12: 00 PM" and the date displayed by default is 01 - 01 -

99. Each item (time and/or date) flashes until adjustment mode has been

selected. By default, the language is French and the units are degrees Celsius

and KM/H.

B - ADJUSTING SCREEN B

Buttons "u" and "v" located on the right hand side of the control panel are used

to do this.

When the display is normal (no warnings, etc), pressing button "u" briefly

changes the display to the date.

Pressing this button at any time for a long period returns to adjustment mode.

Every time this button is pressed again briefly, the parameter to be adjusted

changes until adjustment mode is exited.

Conditions for exiting adjustment mode:

• Button not pressed for 6 seconds,

• Pressing button "u" for a long time.