Operation Manual

y Auto Cue

y Digital output

y Pitch Display

y Frame Search

y Single/Continuous

y +10 Track skip search

y Pitch range: +/-4%, +/-8%, +/-16%

y 8 times over sampling 1 bit D/A converter

y Relay play allow consecutive playback during two decks

1. OPEN/CLOSE button (Disc Tray Open/Close) – This button is used to open and close the disc tray

door.

NOTE: When a disc is loaded, the tray will not open unless the unit is in pause or cue mode.

2. TRACK button – This button is used to select your desired track. Tapping the button will skip

backward to the previous track; holding down this button will rapidly skip backward through the tracks

on your CD.

3. +10 TRACK SKIP button – This button allows you to skip ahead by 10 tracks. Example: if you are at

Track #1, pressing this button will skip you to Track #11, press the button again, it will skip to Track #21.

If there are not that many tracks, it will go back to Track #1.

TRACK button – This button is used to select your desired track. Tapping the button will skip forward to

the next track, holding down this button will rapidly skip forward through the tracks on your CD.

5. LIQUID CRYSTAL DISPLAY (LCD) – This high quality LCD Indicates all the functions (play, pause, cue,

etc..,), as they occur. This display is viewable at several comfortable angles as described on. The LCD

icons will be described in the next section.

MAIN FEATURES

GENERAL FUNCTIONS CONTROL UNIT

14 18

1110