Operation Manual

6. PITCH SLIDER – This slider is used to adjust the playback pitch percentage when the PITCH function is

activated. The slider is a set adjustment and will remain set until the pitch slider is moved or the PITCH

function has been turned off. The maximum pitch range of the slider is +/-16%. This adjustment can be

made with or without a CD in the drive.

The pitch adjustment will remain even if a disc has been removed, and will reflect on any other disc loaded

into the unit. That is to say, if you set a +2% pitch on one disc, remove that disc and insert another, that

disc will also have a +2% pitch. The amount of pitch being applied will be displayed in the LCD. Use this

slider to match the BPM’s of this unit to that of another music source. By changing the pitch of one disc with

respect to the other in this way, the beats can be matched.

7. RELAY button – Use a standard Mini plug (stereo) to plug in Side1 to Side 2. Set both sides of the CD

player to single mode on the control. When Disc 1 ends the CD player will automatically change to Disc

2 and when Disc 2 ends it will return to Disc 1, etc.

SEARCH button – This search button allow you to quickly scan backward through a track.

9. SEARCH button – This search button allow you to quickly scan forward through a track.

10. TIME button – The TIME button is used to change the displayed time values. Time can be displayed as

elapsed track time, remaining track time, and total disc remaining time.

11. SGL/CTN button – This button allows the unit's play mode to change between Single and Continuous. In

single mode the unit will play a single track and return to cue mode. In continuous mode the unit

continues to play track by track.

12. SHUTTLE WHEEL

Playback-mode:

Via the Shuttle-wheel, you can quickly scan forwards and backwards. Turn the Shuttle-wheel to the right

in order to scan forwards and turn it to the left in order to scan backwards. The further you turn the Shuttle

wheel the higher the scanning- speed.

Pause-mode:

In the pause-mode, the current frame is repeated as soon as you turn the Shuttle-wheel.

13. JOG WHEEL

13-1. Playback-mode: Y

ou can temporarily adjust the playback-speed by +/- 16 %.

13-2. Pause-mode:

In the pause-mode, the current frame is repeated as soon as you turn the Jog-wheel.

Via the Jog-wheel, you can slowly search within a title forwards and backwards. In this way, you

can easily find a Cue-point for example. Turn the Jog-wheel to the right in order to search

forwards and turn it to the left in order to search backwards. The faster you turn the Jog- wheel the

higher the searching-speed.

14. CUE button - Pressing the CUE button during playback immediately pauses playback and returns the

track to the last set cue point. The red CUE BUTTON LED will glow when the unit is in cue mode The LED

will also flash every time a new CUE POINT is set. The CUE button can also be held down to momentarily

play the CD. When you release the CUE button it instantly returns to the last set CUE POINT.

15. PLAY/PAUSE button – Each press of the PLAY/PAUSE BUTTON causes the operation to change from

play to pause or from pause to play. While in play mode the play LED will glow, and while in pause mode

the play LED will flash.

16. PITCH button – This button is used to turn the pitch function on and off. The pitch functions of the PITCH

SLIDER, PITCH BEND BUTTONS and JOG WHEEL will not function without this function being activated.

The pitch slider and pitch bend buttons have a maximum range of +/-16%. The "+" and "-" pitch bend

buttons have a maximum range of 16%.

GENERAL FUNCTIONS CONTROL UNIT