Operation Manual

1. TRACK INDICATOR – This 3-digit indicator details a current track. The number displayed in the track

indicator is a direct reference to a track being selected a track in play, pause, or cue mode.

2. TIME BAR INDICATOR - This bar visually details the time defined in the TIME METER (M, S, &F) as

with the TIME METER, this bar is also dependent on the selected time function TOTAL REMAIN, REMAIN

or ELAPSED. This bar will begin to flash when 15 seconds of a track remain and will begin to rapidly flash

when three seconds of a track remain. The flashing bar is a great visual reminder a track is about to end.

The flashing bar will function regardless of which time mode the unit is in.

3. MINUTES METER – This meter will display the elapse, total, or remaining time in minutes. The display

time will be indirect reference to the current time mode.

4. SECONDS METER – This meter will display the elapse, total, or remaining time in seconds. The display

time will be indirect reference to the current time mode.

5. FRAME METER – This meter will display the elapse, total, or remaining time in frames. The displayed

frames will be indirect reference to the current time mode.

6. SINGLE INDICATOR – This indicates the unit is in single play mode, the unit will play a single and return

to CUE mode. If the single indicator is not displayed, the unit is in continuous mode. In continuous mode the

drive will play through all the tracks on the disc.

7. REMAIN INDICATOR – This indicator is in direct reference to the TIME METER. When the REMAIN indicator

is displayed in the LCD, the time defined will refer to a single track's remaining time. The time mode is

changed by tapping on TIME button.

8. TOTAL REMAIN INDICATOR – This indicator is in direct reference to the TIME METER. When the TOTAL

REMAIN indicator is displayed in the LCD, the time defined will refer to a disc's total remaining time. The time

mode is changed by tapping on TIME button.

The unit will indicate the ELAPSED time when neither the TOTAL REMAIN OR REMAIN

indicators are showing.

9. PITCH METER – This meter displays the pitch percentage being applied to playback by the PITCH SLIDER.

If the meter read zero regardless of the PITCH SLIDER'S position, the PITCH function is not activated.

GENERAL FUNCTIONS LCD DISPLAY