Operation Manual

Citronic Limited User Manual
Page 10 of 18
Operating Instructions
1. Opening and Closing the Disc Holder
Ø Turn the unit power on. Press the OPEN/CLOSE
button to open the disc holder. OPEN/CLOSE
buttons are provided on both the main unit and
control unit.
Ø The disc holder cannot be opened during
playback to prevent playback from being
interrupted if the OPEN/CLOSE button is pressed
accidentally. Stop the playback first, then press
the OPEN/CLOSE button.
2. Loading Discs
Ø Hold the disc by the edges and place it in the disc
holder, then press the OPEN/CLOSE button
again to close the disc holder. The unit will show
the total track number and the total playing time
for about 2 seconds then enter the auto-cue
condition, the cue point will be set to the music
starting point of the first track automatically.
Ø
Figure 2-1
CAUTION:
Ø Do not place any foreign objects in the disc
holder, and do not place more than one disc in
the disc holder at a time.
Ø Do not push the disc holder in manually when the
power is off, as this may result in malfunction and
damages the player.
3. Selecting Tracks
Ø Press the SKIP button once to move to next
higher or lower track.
Ø Hold the SKIP button to change tracks
continuously at a higher speed.
Ø When a new track is selected during continuous
playback, playback begins as soon as the skip
search operation is completed.
Ø If the skip button is pressed while at the last
track, the first track is selected. In the same way,
if the skip button is pressed while at the first
track, the last track is selected.
4. Starting Playback
Figure 4-1
Ø Press the PLAY/PAUSE button during the pause
or cue condition to start playback, the PLAY
indicator lights.
Ø The point at which playback starts, is
automatically stored in the memory as the CUE
point. The pickup then returns to the cue point
when the CUE button is pressed. (Back Cue)