Operation Manual

Citronic Limited User Manual
Page 12 of 18
7. Auto Cueing
Ø The CD player will AUTO-CUE Track 1 and any
subsequent track skip, either in Single or
Continuous play mode
Ø AUTO-CUE finds the start of the sound on track 1
or subsequent track skip. This will be noticed in
the Time Elapsed display mode by the track cue
point being at a number of seconds and frames
instead of 00:00:00 time. This will be dependent
on the CD recording.
Ø The CUE indicator will flash for about 1 second
when the CUE point has been set.
8. Cue Recall
Ø Press CUE button, and the player will enter Cue
mode. The player will return to the Cue point and
Pause.
Ø When the PLAY is subsequently pressed, the
track will start from this Cue point.
9. Cue Listen
Ø Before playback is engaged, the start (CUE) point
of a track can be checked (monitored) by pressing
the CUE button.
Ø Press Cue button when the player is in PAUSE
mode. The playback will start when the Cue
button is released the player will return to the cue
point and PAUSE.
Note: the RED Cue indicator will flash for 1
second when the Cue point is set and continuous
subsequently.
10. Cue Editing
Ø The start point of any track can be set to any time
frame you desire.
Ø Firstly find the point by use of the PLAY - PAUSE
- F. Skip - B. Skip and finally JOG frame search.
Ø Once the point is identified the CUE point is
placed into memory by pressing PLAY.
Ø Press the Cue button to return to the new Cue
point and pause mode.
Ø To check the Cue point, press CUE and hold to
listen. Release the button to return to Cue point
and pause.
Ø If the Cue point is incorrect, use the JOG wheel to
frame advance or retard to the required point.
Ø To re-mark and then set the Cue point, press Play
and subsequently Cue.
11. Cue Edit Quick Reference
To edit, set Cue point into memory and set the
player in Pause.