Operation Manual

Citronic Limited User Manual
Page 4 of 18
Important Safety Information
Safety Warnings:
All the safety and operating instructions should be
read before the appliance is operated.
To prevent fire or shock hazard, do not expose this
appliance to rain or moisture.
To reduce the risk of electric shock, do not remove
the cover (or back). There are no serviceable parts
inside. Always refer servicing to qualified service
personnel.
Cautionary Notes:
Care must be taken not to damage the power supply
cord housing, which could expose line parts and
cause electric shock. When removing from wall
outlet, be sure to remove by holding the plug and not
by pulling the cord.
In order to prevent electric shock; do not open the top
cover. If a problem occurs, contact your dealer.
Do not place metal objects or spill liquid inside the
unit. Electric shock or malfunction may result.
Any use of the controls, or any adjustment, or the
performance of any procedure other than those
specified herein may result in serious damage to your
health including hazardous radiation exposure.
The unit should not be opened or repaired by anyone
except properly qualified service personnel.
Double insulated - when servicing, use only identical
replacement parts.
Labels Explained
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE COVER (OR
BACK). THERE ARE NO SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within
the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
CAUTION
TO PREVENT ELECTRIC SHOCK DO NOT USE
THIS (POLARIZED) PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET
UNLESS THE BLADES CAN BE FULLY INSERTED
TO PREVENT BLADE EXPOSURE.
NOTE:
This CD player uses the semiconductor laser. To
allow you to enjoy music at a stable operation, it is
recommended to use this in a room of 5ºC 41ºF -
35ºC 95ºF.
DATE LABEL
MONTH YEAR
DATE LABEL
CLASS 1 LABEL
Line Voltage Selection
« The desired voltage may be set with the
VOLTAGE SELECTOR switch on the rear panel,
using a screwdriver.
« Do not twist the VOLTAGE SELECTOR switch
with excessive force as this may cause damage.
« If the VOLTAGE SELECTOR switch does not
move smoothly, please contact a qualified service
person.
Your Serial Number
Please, record and retain serial number of your CD-1
Dual CD Player shown on the rating label.
My Serial Number Is:
_______________________