Operation Manual

Citronic Limited User Manual
Page 5 of 18
Preparations
1. Checking the Contents
Check that the carton contains the following
items:
1) Main unit
2) Control unit
3) Operating instructions (this booklet)
4) Pair of RCA pin cord.
5) Control cords
2. Installing the Unit
Mount the unit onto your console or rack with 19"
EIA rack rails.
CAUTION:
The player will work normally when the main unit is
mounted with the front panel at within 15 degrees of the
vertical plane. If the unit is tilted excessively, discs may
not be loaded or unloaded properly. (Figure 1)
Max.
15º
45º
5º
Main unit Control
panel Button
Figure 1
Figure 2
Connections
1) Turn off the POWER switch.
2) Connect the RCA pin cord to the input on your mixer.
3) Connect the control cords to the REMOTE connector on the main unit.
CAUTION:
• Be sure to use the supplied control cords. Using another type of cable may result in damage.
• Be sure the power is off when connecting the control cords, otherwise the units may not work properly.
The control panel's LCD's are designed to be clearly
visible within the angles shown in Figure 2. Mount the
control unit so that the visual angle is within this range.