Operation Manual

PACKING CONTENTS

INTRODUCTION

Thank you for purchasing the Citronic CDM8:4 mkV Rackmount DJ Mixer.

This product is intended to give long term, reliable service in normal usage.

Please read these instructions before use to avoid incorrect operation and to help outline the

functions and controls.

MAINTENANCE

No user serviceable parts inside, refer all servicing issues to qualified service personnel. Clean

with a lint-free dry or damp cloth. To replace crossfader, disconnect mains and undo the 2

securing screws slightly, lift the crossfader and disconnect from the in-line connector (noting the

correct orientation). Connect the new crossfader, reposition and secure with the 2 screws.

CONTROLS

Microphone Section

(1) MICROPHONE - Combo XLR and 6.3mm jack inputs for DJ mic and 2 Vocal mics

(2) Hi EQ – High frequency cut/boost for mic inputs

(3) Lo EQ – Low frequency cut/boost for mic inputs

(4) ON AIR – Switches on or mutes DJ Mic

(5) MANUAL OVERRIDE – Reduces music level to allow DJ mic talk-over

(6) DELAY – Delay effect level for Vocal mics 1 + 2

(7) TIME – Time setting for vocal delay effect

(8) MIC LEVELS – Individual level for DJ mic and 2 vocal mics

 CDM8:4 mkV 19” DJ mixer

 IEC mains cable

 Instruction manual