Operation Manual

www.citronic.com
OPERATIONS
1)Microphone Input
TwocombinationXLRand¼"Jacksocketsaremountedonthefrontfaceofthemixerforconnecting
yourmicrophonesandoerbothbalancedorunbalancedconnections
BalancedInputWiring:
Tip:  Pin2: Positive (Hot)
    Ring:  Pin3: Negative(Cold)
    Sleeve:  Pin1: Ground (Shield)
UnbalancedInputWiring: Tip:  Pin2: Positive (Hot)
    Ring:  Pin3: Ground (Shield))
    Sleeve:  Pin1: Ground (Shield)
Inputimpedance:  2kΩ
InputSensitivity:  -54dBu(1.55mV)
2)Gain controls
Eachmicrophonehasitsowngaincontrolallowingmaximumcontrol.Designedtoaccommodate
mostmicrophones,bothlowandhighimpedance’sto600Ω.
Range:  
<70dBto54dB
3)Microphone Equaliser
Eachmicrophoneinputhasa3bandEQstagepriortoPanandLevelcontrols.(SeeTechSpecs)
EQcontrol‘Lo’: 
Allows12dBofcutboosttothelowfrequencies
EQControl‘Mid’:  Allows13dBofcutboosttothemidfrequencies
EQControl‘Hi’:  Allows12dBofcutboosttothehighfrequencies
4)Pan Control
Thiscontrolisusedtosetthestereobalanceoftheinputsignalandcan“Pan”itfullytoleftorright.
5)On Air Switch
Activatesorde-activatesthemicrophonewithouttheneedtoadjustthegaincontrol.
MicOverrideSection:
TheCDM10:4oersthefacilitytoattenuatethemainmusicprogramautomatically 
    whenthemicrophoneinputsareactive.Exceptthe3rdand4thMicinputswhichuse 
    Channels1and2
6)Auto Override Active Switch
Whenpressedthe'live'musicprogramwillbeattenuatedbyapre-setleveldeterminedbythe‘depth’
control(7),thusallowingeithermicrophonesignaltotakepriorityonthemainoutputchannels.
10-4manual.indd 5 16/12/08 17:30:56