Instruction manual

®
FUNCTION
1. POWER BUTTON
Press the power switch to turn the unit on.To
switch the POWER off press the POWER
switch again.
2. JOG & SHUTTLE WHEELS
Shuttle:Use the dial to select the scanning
direction and speed.The disc is scanned in the
forward derection when the shuttle dial is turned
clockwise from the neutral position,in the
reverse direction when the shuttle dial is tuned
counter-clockwise.The scanning speeds up.
When the shuttle dial is tuned faster.
Jog:In pause mode,if you turn the jog,the point
at which the sound is being produced moves by
a number of frames corresponding to the
number of clicks.Clockwise movesthe point
forward, counter-clockwise moves the point
backward.In play mode,the jog increases or
decreases the speed of the song. (Clockwise:
increase,counter-clockwise:decrease).
3. TIME BUTTON
Used this knob to choose the time mode:
Elapsed time, remaining time or total remaining
time.
4. BRAKE BUTTON
When this button is pressed,it's indicator lights
for the brake dsp affect.
5. REVERSE BUTTON
When this botton is pressed,it's indicator lights
and the unit is set to reverse play.
6. IN BUTTON(LOOP SYSTEM)
This button sets the beginning of the loop.The
Loop indicator on the display flashes.
7. OUT BUTTON(LOOP SYSTEM)
When you press this button,you set the end
point of the seamless loop and you start the
loop.To finish the loop,press again this button.
8. RELOOP BUTTON(LOOP SYSTEM)
This button is used to start the last saved
loop,To finish the loop,press the reloop button.
9. SEARCH BUTTON
Constant press the search button,it will star-up
double-quick backwards function.
10. SEARCH BUTTON
Constant press the search button,it will start-up
double-quick forthcome function.
11. SINGLE/CONTINUE BUTTON
Press these to switch between the SINGLE and
CONTINUOUS play mode,The selected Mode
is indicated on the LCD,In SINGLE mode,after
each track,the unit stop the reading, In
CONTINUOU mode,the unit read all track and
stops.
12. CUE BUTTON
Pressing the CUE button during play provides a
return to the position at which play was started.
13. PLAY/PAUSE BUTTON
Each time you press the PLAY/PAUSE
button,the operation changes from play to
pause or from pause to play.
14. PITCH BEND“+”BUTTON
The pitch will automatically rise when the
+button is pressed-and return to the riginal
pitch when it is released.
15. PITCH BUTTON
If you push this button,the adjustment of the
pitch potentiometer is available.
16. PITCH BEND“-”BUTTON
Te pitch will drop while the - button is pressed
and return to the original pitch hen it is
released.
17. DISPLAY
A.C
D SD/USB INDICATOR
B.TRACK NUMBER
This displays the position,number of the
USB or SD CARD,which is playing.
C.OPERATING MODE
These indicate the operating mode of the
player
D.TIME MODE INDICATORS
ELAPSED: Played time of the selected
track.
TOTAL REMAINING: Total remaining play
time of the USB or SD CARD.
REMAINING: Remaining play time of the
selected track.
E. MIN.,SEC. AND FRAME DISPLAYS
These displays shows the current time,the
value changes depends on the time mode
selected.
F.TIME BAR INDICATOR
This is a graphical representation of the
“Minute,second and frame displays”(C).
G.“CUE”INDICATOR
This indicates a new cue is set.
H.FOLDER DISPLAY
I.PLAY MODE INDICATORS
SINGLE: The USB or SD CARD player is in
single mode.
CONTINUE: The USB or SD CARD player
is in continue mode.
J.“LOOP”INDICATOR
This indecates the USB or SD CARD player
is currently playing in a preset loop.
K.“PITCH”INDICATOR
When the “PITCH”display,the pitch sider just
have function
L.PITCH DISPLAY
This indicates the playback
speed(pitch),from
16% to +16%.
M.ID3 COMMUNICATION DISPLAY
N.BPM
Display the BPM of the track displayed.
18. TAP
Press the TAP button repeatedly to the beat of
the music to manually determine the speed of