OWNERS MANUAL Version 1.
Safety information 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this item near moisture. Clean only with dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacture’s instructions. Do not install near any heat sources such as radiators, stoves or other items (including amplifiers) that produce heat.
CITRONIC CDUSB-1 Main Features: 1 x USB front and 1 x USB rear inputs which can be read by both players simultaneously Single front load CD player with 20 seconds anti-shock protection MP3/WAV compatible from CD or USB (ID3 tags) IR Remote control operation Auto Cue Single/Continuous playback +10 Track skip search Pitch control and pitch display High quality easy read LCD display Easy-to-use folder and file search Jog wheel for frame search Selectable elapsed, remain and
General Checks and Advice 1) Before switching off the power ensure there is no CD in the draw, the disc tray is fully closed and the LCD display reads “NO DISC”. 2) Installation 3) • Place the unit on a flat surface or mount in a secure rack case. • The CD unit will work normally when it is mounted when the front panel is within 15° of the vertical plane. If tilted excessively discs may not be loaded properly. Also ensure the head unit at a similar to the one shown below for the best visual results.
General Functions and Controls 1. DISC TRAY – This tray is used to load and unload a compact disc into the drive mechanism. The tray is opened and closed by pressing the OPEN/CLOSE BUTTON. Never attempt to force the disc tray open or close when the power is turned off. 2. USB PORT 1 (FRONT) – Insert a USB mass storage device for playing MP3 files. 3. OPEN/CLOSE (Transport Tray Open / Close) – This button is used to open and close the disc tray.
9. TAP BUTTON - This button is used for manual BPM. When in manual BPM mode, tap this button to the beat of the current track. 10. PITCH SLIDER - This slider is used to adjust the playback pitch percentage. Move the slider down to speed up the music and move the slider up to slow the music down. 11. PITCH BEND BUTTONS – The speed rises while the “+button” is pressed and returns to the original pitch when the button is released.
19. JOG WHEEL – The JOG WHEEL can be used to pitch bend during playback and be used to frame search in pause mode. 20. POWER SWITCH - This switch is used to control the unit's main power. 21. POWER CONNECTOR - This is the main power connection. Only use the supplied power cord. Use of any other power connections may result in severe damages to the unit. 22. USB PORT 2 (REAR) – A secondary port to insert your USB mass storage device for playing MP3 files. 23.
10. AUTO CUE STATUS – Indicates if AUTO CUE is activated (“AUTO CUE”). Press and hold SGL/CTN at least 1 second to turn the AUTO CUE function on and off. 11. TIME DISPLAY – Indicates the time of the chosen time mode in either minutes, seconds and frames. 12. MP3 INFORMATION INDICATOR – Indicates the current name of the folder and the sampling rate. 13.
Remote Control: 1. OPEN/CLOSE – Used to open and close the disc tray. 2. CUE – Used to instantly return to the last set CUE POINT. 3. SEARCH BUTTONS – Used to quickly scan backward & forward through a track. 4. TRACK BUTTONS – Used to scan backwards & forward between tracks. 5. FOLDER BUTTONS – Used to scan backward & forward between folders on a USB device to find the desired folder. 6. VOLUME CONTROL BUTTONS – Used to adjust the volume of the integrated amplifier. 7.
Internal Menu Hold TIME BUTTON for 3 seconds to enter the internal menu. Turn TRACK KNOB to scroll through the different menus and press the TRACK KNOB to enter the corresponding submenu. Turn TRACK KNOB to change the submenus and press TIME BUTTON to memorise your settings in any operating mode and exit the menu. 1. Playlist – Normal / Title/ Artist / Album/ Genre 2. Sleep Time – No sleep, 5~120 min 3. Line Setup – MODE= 1~3(Line mode) Dis=0.5~12.0 sec.
Data Management DATABASE BUILDER: Database management software for the CDUSB-1 enables you to search for your files by Title, Artist, Album and Genre. Installation: Refer to the following figures for installing database management software on your computer. Download available at www.citronic.
The database builder will scan the music on your USB device and create files which can be read by the CDUSB-1. You can then easily search for the songs you want alphabetically by; song title, album title, artist name, genre etc without having to rearrange your folders. Scan and create: Refer to the following figures to process scanning and creating database.
Specification 1. 2. GENERAL SECTION PRODUCT CDUSB-1 POWER SOURCE AC100 - 240V, 50/60Hz POWER CONSUMPTION 13W DIMENSIONS 482mm (W) X 270.5mm (D) X 88.8 mm (H) WEIGHT: Main Unit: 4.35 Kg AUDIO CHARACTERISTICS (CD TEST DISC: TCD-782 & TCD-781; USB TEST FORMAT: MP3, 128KBPS; LOAD=100KΩ) ITEM TYPICAL LIMIT CONDITION 2V +/-0.5dB 2V +/-1dB 1.85V +/-0.5dB 1.85V +/-1dB WITHIN 0.2dB WITHIN 1dB CD: 17-20KHz +/-0.4dB 17-20KHz +/-1dB USB: 17-16KHz +/-0.2dB 17-16KHz +/-1dB -20dB +/-0.
3. CD SEARCHING TIME: (TEST DISC: TCD-792) ITEM 4. TYPICAL LIMIT (1) SHORT ACCESS TIME 2Sec 4Sec PLAY NEXT TRACK (2) LONG ACCESS TIME 4Sec 6Sec TRACK 1 TO 20,20 TO 1 TYPICAL LIMIT CONDITION (1) INTERRUPTION 1mm 0.7mm TCD-725 (2) BLACK DOT 1mm 0.6mm TCD-725 (3) FINGER PRINTS 75um 65um TCD-725 (4) ECCENTRICITY 140um 140um TCD-712 W/O TRACK JUMP 1mm 0.5mm TCD-731R CD PLAYABILITY: ITEM (5) VERTICAL DEVIATION 5.
FOR MORE INFORMATION ON CITRONIC PRODUCTS VISIT WWW.CITRONIC.