Instruction manual

General Functions and Controls
1. DISC TRAY – This tray is used to load and unload a compact disc into the drive mechanism.
The tray is opened and closed by pressing the OPEN/CLOSE BUTTON. Never attempt to
force the disc tray open or close when the power is turned off.
2. USB PORT 1 (FRONT) – Insert a USB mass storage device for playing MP3 files.
3. OPEN/CLOSE (Transport Tray Open / Close) – This button is used to open and close
the disc tray. NOTE: When a disc is loaded, the tray will not open unless the unit is in
PAUSE or CUE mode.
4. SOURCE SELECT BUTTON – This button lets you toggle between the CD tray and USB
port 1 and 2. The selection is indicated by LEDs.
5. TIME BUTTON - The button will switch the time value described in the TIME METER
between ELAPSED playing time, TRACK remaining time and TOTAL remaining time.
6. SGL/CTN BUTTON - This function allows you to choose between single track play or
continuous track play (all tracks in order with no pause between). This function also
operates in RELAY mode. With this button you can switch auto cue on and off, by holding
the button down for 2 seconds.
7. LCD DISPLAY – The high quality LCD display gives a clear indication of all the functions
as they occur (see LCD display section for more details).
8. TRACK / FOLDER KNOB - This knob has three functions:
a. You can use it to select the next or previous track/folder by turning the knob
forwards or backwards.
b. Holding down and turning the knob forwards or backwards will rapidly skip through
the tracks/folders on your CD/USB by 10 tracks per click.
c. Press track knob to read the ID3 tags on the file name. Switch between: File name
/ Title name / Artist / Bit rate on the LCD display.