Instruction manual

19. JOG WHEEL – The JOG WHEEL can be used to pitch bend during playback and be used
to frame search in pause mode.
20. POWER SWITCH - This switch is used to control the unit's main power.
21. POWER CONNECTOR - This is the main power connection. Only use the supplied power
cord. Use of any other power connections may result in severe damages to the unit.
22. USB PORT 2 (REAR) – A secondary port to insert your USB mass storage device for
playing MP3 files.
23. AUDIO OUT R & L BALANCED XLR - These XLR connectors send audio left and right
analog mono output signal. Use these jacks to send a balanced signal to a mixer or amplifier.
24. AUDIO OUT R & L RCA - These jacks send a left and right analog mono output signal. Use
these jacks to send standard audio to a mixer or receiver. The red colored jack represents the
right channel output and white jack represents the left channels output.
LCD Display
1. CUE - This indicator will glow when the device is in CUE mode. It will flash every time a
new CUE point is set.
2. FOLDER INDICATOR – Indicates the current folder number selected.
3. TIME BAR INDICATOR – The flashing bar shows either the elapsed time or remaining
time of the track. The bar will being to flash when the track is about to end.
4. BPM STATUS – This will indicate if the AUTO BPM counter is active.
5. BPM METER – Show the BPM value of the currently playing track.
6. PITCH METER – Shows the percentage of the track’s pitch.
7. PITCH LOCK SYMBOL – When highlighted the PITCH LOCK button is active.
8. LOOP INDICATOR – Indicates if a loop has been set and can be activated by pressing
the RELOOP button.
9. RELOOP INDICATOR – Indicates if LOOP is active.