Operation Manual

™
Features & Functions
Control Unit
1. Open/Close
Press it to open and close the disc holder. The main unit also includes OPEN/CLOSE buttons. The disc holder cannot
be opened during playback, so stop playback before pressing the button.
2. LCD Display
3. Jog Wheel
The jog wheel is multi functional. When in pause mode turning the jog wheel will search the CD frame by frame in 1
second increments. When in play mode the jog wheel can be used to pitch bend.
4. Backward Search Button
Pressing this button will fast search back through the CD in 15 second increments.
5. Forward Search Button
Pressing this button will fast search forward through the CD in 15 second increments.
6. SGL/Cont (Single/Continuous)
Press this button to select single play mode where the CD will stop at the end of the track or continuous play where the
CD will continuously play through each track in the CD. The selection is indicated on the LCD display.
7. Stop Button
This button will stop the CD.
8. Time Button
This button switches the time display between remaining time, elapsed playing time, and total remaining time. The
Outro function is also activated using this button where the last 30 seconds only of the selected track will play.
9. Pitch On/Off Button
Pressing this button switches the pitch on and off.
10. Pitch Bend Buttons
Pressing these buttons will increase ‘+’ or decrease ‘-‘ the pitch of the CD playing when the button is released the pitch
returns to normal as determined by the pitch slider (16).
11. Skip
Button
Use this button to go back to the beginning of the current track or select a previous track for playing.
12. +10 Button
Use this button to skip 10 tracks forward.
13. Skip Button
Use this button to go back to the beginning of the current track or select a previous track for playing.
14. BPM Button
This button allows you to manually set the tracks BPM. To set the tracks BPM tap this button a few times to the tracks
beat, the unit will translate your taps to BPM which is then displayed in the LCD (2).
15. Cue Button
Pressing the CUE button during play provides a return to the position at which play was started. If PAUSE is used
before CUE or a CUE POINT was set, that will become the cue point. Alternately pressing the Play button and the CUE
button allows the CD to be played from the same position any number of times. The CUE Button will light up from the
time the CUE button is pressed until the CD has reset to the position at which play was started. Steady lighting of this
button indicates the ready condition. The CUE button can be held down to play a CD. When you release the CUE button
it instantly returns to the CUE POINT.
16. Play/Pause Button
Use this button to start playback. Press once to start playback, once again to set the pause mode, and once more to
resume playback.
17. Pitch Slider
Use the slider to adjust the CD pitch. Slide up to decrease the pitch, down to increase the pitch.