70.
The CD-S6 Ultima Single CD-Player The new CD-S6 Ultima from Citronic is the latest freestanding single CD player for the creative DJ. It features digital turntable technology with the large ‘AQ Touch’ interactive jog wheel.
Important Safety Information WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: 1. Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. When removing from wall outlet, be sure to remove by holding the plug attachment and not by pulling the cord. 2. In order to prevent electric shock, do not open the top cover.
Important Safety Instructions 1. Read Instructions – All the safety and operating instructions should be read before this product is operated. 2. Retain Instructions － The safety and operating instructions should be retained for future reference. 3. Heed Warnings － All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions － All operating and use instructions should be followed. 5.
Setting up the CD-6 Ultima 1.Checking the Contents Check that the carton contains the following items: 1. Main unit 2. Operating instructions 3. An RCA pin cord. 4. An AC power cord. 2. Installing the Unit 1. Place your unit on a flat surface. 2. Be sure the player is mounted in a well-ventilated area where it will not be exposed to direct sunlight, high temperatures, or high humidity. 3. Try to place the unit as far as possible from TVs and tuners, as the unit may cause undesirable interference.
Front Panel Illustration 19 18 TIME S EARCH TEMP O LOCK PITCH RANGE 1 ON OFF 17 TRACK RATIO 2 5 SEAMLESS LOOP 4 1 4 BANK P. RELOOP 3 BPM 1 2 3 4 1 1 2 1 TAP 4 1 SCRATCH HOLD SKID 16 PAN PHASE 6 15 CUE 7 BANK S 2 1 3 TIME 4 SGL CTN 8 14 13 12 9 PROFESSIONAL AUDIO 10 11 Features & Functions Top Panel 1.
5. Reloop Button Once a seamless loop has been created and the play is back in normal play mode pressing the RELOOP button at any point during the same CD will send the player back in to LOOP mode. Pressing this button repeatedly will create a stutter effect from the beginning of the loop. 6. CUE Button Pressing the CUE button will return the CD back to its most recently set CUE point.
35 TIME PITCH RANGE 20 RATIO 21 BPM 1 4 BANK P. 1 2 3 4 1 1 2 1 TAP 4 1 22 34 33 32 31 SCRATCH 23 HOLD SKID PHASE PAN 24 25 26 27 28 29 30 25. Scratch/Skid Effect Select This button will select the Scratch effect when (23) is green and the Skid effect when (23) is blue. Scratch Effect: When this effect is selected the ‘Jog Wheel’ (11) becomes touch sensitive allowing the user to scratch the music in real-time. The ‘Parameter Time’ will adjust the sensitivity of the wheel.
34. Pitch Range Select Button Pressing this button selects the pitch range for the pitch slider (16) the selection flashes briefly in the LCD display when selected. They pitch range selection is also indicated on the button as follows: • ±4% - The button glows red • ±8% - The button flashes red • ±16% - The button glows blue • ±100% - The button flashes blue 35. LCD Display See 36 – 51 for a complete description. 36 37 38 39 40 51 41 50 49 42 48 43 47 46 45 44 36.
50. Single This indicator will glow when the player is in ‘single’ play mode. The track will play once then return to its Cue point. If the ‘Single’ indicator is not glowing the player is in ‘Continuous’ mode each track will play in turn until the end of the last track when the player will return to its original Cue point. 51. CD Direction Indicator Indicates which way the CD is playing; Counter-Clockwise indicates the player is in reverse mode.
How to use advanced features? 1) Setting a CUE Point There are a few different ways to set a Cue point, a Cue point can be made anywhere on the disc. Once set, pressing the Cue button (6) will return the CD to this point. A Cue point can also be assigned to each of the four memory bank buttons (15) allowing for three independent accessible Cue points set from anywhere on the disc.
6) Editing a Seamless Loop Once a Seamless loop has been created you can edit the ‘OUT’ point to make the loop longer or shorter.
9) Activating the ‘AQ-Touch’ Scratch/Stutter functions The CD-S6 Ultima uses a revolutionary development with the ‘AQ-Touch’ jog wheel (11). When activated the jog wheel (11) reacts like a turntable platter, touching the wheel will stop the CD playing and moving the wheel will scratch the music in real-time. There are two different modes scratch mode allows you to scratch like vinyl and scratch/stutter returns the track to its cue point by tapping the jog wheel.
Technical Specification Performance Characteristics (test disc: TCD-782, Load=47Kohm) Quantization Sampling Rate Over Sampling Rate Output level Load Impedance: Channel Balance Frequency Response De-Emphasis Channel Separation* THD – Noise* S/N Ratio (HF-A)* : 16 bit linear per channel : 44.1 KHz at normal pitch :8x : 1Vrms ±0.5dB : >47K ohm : 0.5dB : ±0.5dB (20Hz-20KHz, 0dB) : ±2.5dB (16KHz, -20dB) : 83dB : 0.01% : 86dB Note* with 20KHz low pass filter.
SM-FX500 Ultima DJ Mixer The SM-FX500 Ultima mixer, a high quality DJ Mixer with 8 built in Digital effects. It also has 3 digital effects assignable to the crossfade, this opens up a whole new world of creative mixing capabilities. On top of the Digital Effect Processor this high quality unit has a host of great features like the user replacable high quality channel faders and crossfader, digital output, and Master and Cue selectable LED Monitor.
To see more products in the range visit…. www.citronic.
