Operating instructions

50. Single
This indicator will glow when the player is in ‘single’ play mode. The track will play once then return to its Cue point. If the
‘Single’ indicator is not glowing the player is in ‘Continuous’ mode each track will play in turn until the end of the last track
when the player will return to its original Cue point.
51. CD Direction Indicator
Indicates which way the CD is playing; Counter-Clockwise indicates the player is in reverse mode. This indicator also
gives a visual display of the track position during scratch mode.
52 53 54 55 56
52. Audio Output
These stereo jacks provide the output signal. Connect the left and right jacks to there respective jacks on the mixer or
receiver.
53. Digital Output
This output will give a Stereo digital music signal. This can be used for connection to compatible digital devices such as a
digital amplifier, mixer, and recording device.
54. Remote Start Connector
This is to connect the 3.5mm mini jack from the Remote control to the compatible mixer to allow the remote fader start
feature.
55. Power Switch
This switch is used to switch the main power to the unit.
56. AC Connection
This connect accepts a standard UK IEC connection power lead.
™
10