Operating instructions
™
Front panel illustration
2
3
4
5
6
7
8
9
10
19
17
16
22
14
15
18
12
11
131
20
21
23
Features & Functions top Panel
1. DISPLAY PANEL ─ LCD-display for displaying the different modes and functions.
2. SEARCH WHEEL － This wheel has 4 forward and 4 reverse speed positions allowing you to quickly scan
through tracks. The more you turn the wheel in either direction the faster you search.
3. TRACK BUTTON － These buttons are used the select a track. Tapping the button will forward/back skip
to the next track, holding down the button will rapidly forward/back skip through the tracks.
4. IN BUTTON － This function allows you to set a cue point without music interrupt. This button also sets the
starting point of a seamless loop.
OUT BUTTON － This button is used to set the ending point of a loop. A loop is started by pressing the IN
button, pressing the OUT button set the loop ending point. The loop will continue to play until the OUT
button is pressed once again.
5. RELOOP BUTTON － If a seamless loop has been made, but the CD player is not actively in seamless
loop mode (a loop is not playing), pressing the RELOOP button will instantly reactivate the seamless loop
mode. To exit loop, press the OUT button. LOOP and RELOOP will appear in the LCD display when the
reloop function is available. During play mode, pressing the RELOOP button will instantly return play the
last set point without interrupt of music.
6. CUE BUTTON － Pressing the CUE button during playback immediately pauses playback and returns the
track to the last set cue point. In pause mode and the CD is at the cue point, press the CUE button to
provide cue monitor. The red CUE LED will lit when the CD is at the cue point.
7. PLAY/PAUSE BUTTON － Each press of the button to change from play to pause or from pause to play.
In skid mode, press this button to break or slow start.
8. SAMPLER BUTTON － Press this button, then press the desired BANK button to set the sampler mode.
When sampler mode is set, then sampler will mix the CD music together. The sampler can play even no
disc inside. The sampler will play only once or continuous depends on pressing sampler button once for
continuous play and LED is lit; press button again to single play and LED is flash. And press again to
cancel sampler function.