Operating instructions

™
9.
MEMORY BUTTON － Press this button to set the memory mode, then press the desired BANK button to
memorized the music from the cue point. The music length to be memorized is determined by the length of
BANK. When the memory mode is set, the MEMORY LED is lit. You can also memorize the BANKs and
the last play mode (i.e. time, single/continuous, pitch select) by pressing the memory for 1 sec. To recall
the BANKs, just make the memory mode set before put the disc on the tray.
10. EJECT BUTTON － Press this button to eject disc. The disc will not eject unless the player is in cue or
pause, this prevent accidentally ejecting the disc when in play mode.
11. KEY LOCK BUTTON － This button is used to choose the key lock mode and the pitch control mode. Key
lock mode allows key change while maintaining the original key. When the key lock mode is selected, the
LED above the TEMOP LOCK button glows red.
12. PITCH ON/OFF BUTTON – This button is used to turn the PITCH SLIDER function on and off.
13. 4%,8%,16%,100% PITCH SELECT BUTTON － Press the button in order to change pitch percentage of
4%,8%,16%,100%.
14. 4 HOT CUE BUTTONS － Press the desired BANK button when the MEMORY LED is lit will set the
memory mode. The music from the cue point will be memorized to the flash. Press the desired BANK
button when the SAMPLER LED is lit will set the sampler mode. The sampler length is determined by the
smaller one of out point and bank length. Press the desired BANK button will return to the start point
instantly. The LED of the BANK button actived will be flashing.
15. PITCH SLIDER － This slider is used to adjust the playback pitch percentage. The slider is a set
adjustment and will remain set until the pitch slider is move or the pitch function has been turned off.
16. TIME BUTTON －
The TIME button will switch the time value described in the time meter between elapsed play time, track
remaining time, and total remaining time.
17. SGL/CTN BUTTON － This function allows you to choose between single track play or continuous track
play (all tracks in order).
18. PITCH -/+ BUTTONS － The desired pitch of CD decrease or increase when button is pressing and
returns to the original pitch when the button is released.
19. JOG WHEEL － This wheel has three functions:
1. The jog wheel will act as a frame search control when the CD in the pause or cue mode, allowing you to set a
point.
2. The wheel also works as a pitch bend during playback. Turning the wheel clockwise will increase the pitch
percentage up to 100%, and turning the wheel in the counter-clockwise direction will decrease the pitch percentage
down to –100%. The pitch bend will be determined on how long you turn the jog wheel continuously.
3. The jog wheel also controls the bop function and a speed effect when the jog wheel effect function is activated.
20. CD LED － This LED is illuminated when a CD tray empty.
21. PARAMETER/ FORDER BUTTON － Each press of the button to switch parameter and folder.
(1) In the parameter mode, turn the Time knob to adjust time and turn the Ratio knob to adjust ratio.
(2) Press the button again to switch to the folder mode.
a. TRACK KNOB － Pushing the track knob into “normal mode” and turn this knob to choose the
desired track on the disc and show the track name is playing in the LCD
b. FOLDER KNOB －Turning this knob enter “folder mode” to choose the desired folder then turn
the track knob to choose the desired track within the folder; the folder and track name that is
playing showed in the LCD. (Pushing the folder knob enter “folder mode” to see the folder name
when in normal mode)
c. Follow the File Name on the LCD to skip the MP3 track firstly, then the setting of File Name、Title
or Artist will be showed when the MP3 track is read.
22. BPM BUTTON － To change the auto/manual BPM mode.
23. TAP BUTTON －
1.The TAP button is used for manual BPM.
2. Press and hold the TAP button then turn the FOLDER or Track knob will enable you to adjust BPM value.
24. REVERSE BUTTON － This button activates reverse play mode. This function will play your track or
sampler in reverse.
25 26 27 28 29 30 24