Operating instructions

™
LCD Display
2
10
3
19
12
1
4
5
6 7 8 9
11
13
14
15
16
17
18
20
21
1. AUTO CUE － This will indicate if the Auto Cue is
on or off. Press and hold the SGL/CTN for 1 sec. to
turn the Auto Cue function on and off.
2. SINGLE － Shows when the unit is set to play just
one track at a time. When this is not lit the CD will
play continuously through all tracks. The function is
controlled by the SGL/CTN button.
3. LOOP － shows when the CD is repeating a
particular area with the music on the CD.
4. RELOOP － shows when the CD has had a loop set
previously and can go back to loop again.
5. ELAPSED, TOTAL REMAIN － These indicate that
the time shown on the display is the ELAPSED,
TOTAL REMAINING or single song remaining time.
6. ~ 8.MINUTE, SECOND, FRAME － These displays
indicate information on the current track and time
9. TIME BAR － shows either time remaining or
elapsed depending on the setting of the TIME button.
10. FOLDER / TRACK － Shows the folder / track that
unit is playing with.
11. PITCH － Shows the pitch percentage of the song.
12. ANTI SHOCK AND BUFFER INDICATOR － The
memory status is represented on the display by a
bucket being filled or emptied. The bucket itself
represents the instant start function works by buffer
memory. If the bucket is flashing, the instant start is
not available. Each bar within the bucket represents
2 seconds of anti shock protection. There is up to 10
seconds of anti shock available.
13. CUE － Lit when the unit is at a cue point.
14. PAUSE － The PAUSE indicators light during pause
or cue mode.
15. PLAY － lit while the unit is playing a CD.
16. CD INDICATOR － This will indicate that a CD is
loaded in the drive.
17. MP3 INDICATOR － This will indicate that a MP3
disc is loaded in the drive.
18. CHARACTER DISPLAY －
This will display the
name of the track and album when a MP3 disc is
loaded.
19. KEY LOCK － This will indicate the key Lock
function is active.
20. AUTO BPM － This will indicate that the AUTO BPM
counter is active.
21. BPM INDICATOR － This meter will display either
the BPM’s of the current track.