OWNERS MANUAL Version 1.
Safety information 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this item near water. Clean only with dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacture’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves or other items (including amplifiers) that produce heat.
Main Features: Auto CUE Instant Start Switching power supply Digital Anti-Shock (10 seconds) Real time scratch play Pitch bend +/- 100% for CD 2048 programmable CUE points (512 discs x 4 cue points on each) 8 different speed scan (4 forward / 4 reverse) Adjustable pitch percentages (+/-4%, +/-8%, +/-16% or +/-100%) 5 digital effects: SCRATCH, ECHO, FLANGER, FILTER, BRAKE Pitch control Seamless loop Fader start playback Full function MP3 Playback RELAY playback Music mast
General Functions and Controls 1. TRACK KNOB - This knob has three functions: a. You can use it to select the next or previous track by turning the knob forwards or backwards. b. Holding down and turning the knob forwards or backwards will rapidly skip through the tracks on your CD by 10 tracks per click. c. Press track knob to read the ID3 tags on the file name. Switch between: File name / Title name / Artist / Bit rate on the LCD display. 2.
4. OUT BUTTON - This button is used to set the ending point of a LOOP. A LOOP is started by pressing the IN button to select the starting point and the OUT button to set the LOOP ending point. The LOOP will continue to play until the OUT button is pressed once again. 5. RELOOP BUTTON - If a SEAMLESS LOOP has been made, but the CD player is not actively in SEAMLESS LOOP mode. a. Pressing the RELOOP button will instantly reactivate the seamless loop mode. To exit loop, press the OUT BUTTON.
19. SCRATCH BUTTON – This button is used to activate the scratch effect by touching the surface of the JOG WHEEL 20. ECHO BUTTON – This button is used to add an ECHO effect to your output signal. 21. FLANGER BUTTON – The FLANGER effect distorts the output signal and creates an effect similar to the frequency, phasing in and out of each other. 22. FILTER BUTTON – The FILTER effect tweaks the original sound to add different tonal definition. 23.
counterclockwise will decrease the pitch percentage down to -100%. The pitch bend will be determined on how long you turn the JOG WHEEL continuously. c. The JOG WHEEL can be used to control the output values of both the X & Y parameters for the digital effects. Rear Connections 1. AUDIO OUT R & L - Audio out signals. Connect stereo RCA cable from audio out to a mixers line input. 2.
LCD Display 1. A.CUE - This will indicate if the AUTO CUE is on or off. AUTO CUE will find the first beat on the track automatically. Press and hold the SGL/CTN for 2 second to turn the AUTO CUE function on and off. 2. A.BPM - This will indicate if AUTO BPM is active. If you use the TAP button then this will turn the AUTO BPM counter off. 3. SINGLE – This will indicate if the player is in single track or continuous play mode. 4. LOCK - This will indicate if the players TEMPO LOCK mode is active. 5.
11. TIME DISPLAY – This indicates in detail the current Minutes, Seconds and Frames. The meter will display the elapsed time, remaining time or total remaining time of the entire disc depending on which option you choose. 12. TIME BAR – Gives a visual representation of the time remaining or time elapsed and will flash shortly before the track ends. 13. PARAMETER COUNT – Shows the current BPM or values for the X and Y Parameters when in use. 14.
Specification: MODEL: POWER: DIMENSION: WEIGHT MPCD-X1, MP3/CD player AC100-240V, 50/60Hz, 13W 246 (W) X 348 (D) X 103.5 (H) mm 2.46 kg Note: Specifications and design are subject to change without notice for purpose of improvement. AUDIO CHARACTERISTICS: (CD Test disc: TCD-782; load=100k ohm) ITEM OUTPUT LEVEL CHANNEL BALANCE FREQUENCY RESPONSE DE-EMPHASIS TYPICAL LIMIT CONDITION 2V +/-0.5dB 2V +/-1dB 1kHz, 0dB WITHIN 0.2dB WITHIN 1dB 1kHz, 0dB 17-20kHz +/-0.
FOR MORE INFORMATION ON CITRONIC PRODUCTS VISIT WWW.CITRONIC.
