Operation Manual

13
FIRMWARE VERSION
You may display the unit rmware version Firmware is
the unit internal programming code. Once enter preset
menu and then turn the TRACK KNOB until Vxx.xx is
displayed. “x’s” are the version number.
FIRMWARE upgrade:
BASIC OPERATION
Step1: Copy the controller code or DSP code from PC and then save into memory device (Files must be in
root directory).
Step2. O the controller power cord and re-plug in.
Step3: Press STANDBY button to power on
Step4: Insert
memory device into player A, USB port or SD card slot 1 to upgrade and “Update 10%~100%”
will show in the display (for DSP code), “UpdateUIxx” will show in the display (for controller code)
Step5: When upgrade is done ”COMPLETE” will display, removed memory device
.
Step6: O
the controller power cord and re-plug in. After pressing the STANDBY to power on, if “UpdateUI - -”
is displayed (failure), please repeat procedure step2 to step5.
Step7: Check the version number of the new rmware in the
RESET MENU
Step8: Done
Note:
1. Please delete the code within memory device when upgrade has already done.
2. Power disconnection during
processing or unknown memory device will cause failure
..