Operation Manual

SOURCE SELECT functions

MUSIC SOURCE DEVICE SELECT

There is a SOURCE SELECT BUTTON to select the music source playback in each PLAYER by your

desires.

You have three different choices as below:

(a) THE SAME CARD PLAYBACK

To play the same card in both player 1 and player 2; insert the card into either SDA or SD B slot. Press

the SOURCE SELECT and both SD A LEDs in the player panel are on when card is in SD A slot; either

does when card is in SD B slot.

(b) TWO CARDS PLAYBACK

Each SD slot inserts a card to play. And each player select different SD slot to play.

Press the SOURCE SELECT button and both SD A/B LEDs are on to play the USB device. When

connecting a USB stick, USB card reader, or external hard drive make sure you are correctly lined up

with the USB port and gently insert the USB connection. To disconnect a USB drive, stop playback and

"pull out" the USB connection.

or or

2. CHANGE MUSIC SOURCE DEVICE DURING PLAYBACK

It must in the pause mode, to press the SOURCE SELECT BUTTON you can select the other card. It will

no function when in the play mode.

PERATI